Pandrol rail fastenings have been used on all of the major heavy haul railways in the world with a track record covering more than 4 decades and extending across all continents.
In the 1970’s Pandrol began supplying the Heavy Haul giants around the globe with the original Pandrol PR Clip system which resulted in Pandrol becoming the established product for Heavy Haul operations. The main Heavy Haul users in Africa, Australia, Brasil, Canada and the USA all had different operating environments, climates and local conditions which gave Pandrol a unique understanding of the Heavy Haul needs across different territories.
As Pandrol has developed its product range and introduced new technologies it has applied those technologies to the requirements of heavy haul. Today we have a full range of products for axle loads up to 40 Tonnes for operating railways and we even have some special applications for crane rails for up to 50 Tonnes. If you have axle loads higher than that please contact us!
Click on the tabs below to view products suited to this application. If you know the name of the product you are looking for you can see a full list in the Products section. To talk about your requirements with one of our team members find details of your local office in our contacts area.
The Pandrol FASTCLIP FE RR system has been developed for extreme heavy haul applications suitable for up to 40 Tonnes axle load and curve radius down to 150 m Recessed rail seat and special 2 part combined moulded pad and insulator provides longer life rail fastening components and significantly extending the life of insulators in curved tracks compared to […]
The Pandrol FASTCLIP FC system is designed for all categories of track, and specifically engineered to be capable of rapid installation by mechanised equipment. The FASTCLIP FC product has substantial global references on both concrete and steel applications. FASTCLIP FC is a threadless Fastening, with low maintenance and pre-assembly of the fastening which remains captive on the sleeper. Rapid installation capability (up […]
The Pandrol Re SYSTEM delivers an assembly with faster installation times and a reduced number of components when compared to a traditional e-Clip equivalent. The Pandrol Re System adopts two-part insulator technology and integrated insulator/pad manufacture to provide extended life of components and efficiency gains. This can lead to more productive engineering possessions for track refurbishment, such as re-railing, when […]
Original Pandrol e-Clips have been installed in more than 50 countries worldwide with hundreds of applications. Original design Pandrol e-Clip systems for virtually every possible known rail section, manufactured to one quality standard at one of Pandrol’s global manufacturing facilities. Although the Pandrol e-Clip is increasingly being superseded by the pre-assembled Pandrol Fastclip, these fastenings are still widely used […]
The PANDROL FASTCLIP FE system is a resilient, threadless, pre-assembled rail fastening system with low installed cost. Pandrol FASTCLIP has substantial global references and has been designed as a total system in which all components are delivered to site pre-assembled on the sleeper. Once the sleepers are laid, and the rail installed, the clip is simply pushed onto […]
The Pandrol VIPA DFC System has been optimised for use in pre-cast blocks, sleepers and slabs. It is an economical, high performance solution for track where where some noise and vibration mitigation is required. PANDROL VIPA DFC has been designed for use on slab tracks where a typical vertical static stiffness of 20-25 kN/mm is required for […]
Pandrol FASTCLIP SFC baseplates are designed for use on wet pour top down slabs, pre-cast blocks, sleepers or plinths. The Pandrol Fastclip SFC baseplate system is a single resilient baseplate which has been designed to easily transfer the advantages of the Pandrol Fastclip system to slab track applications. The design allows full advantage to be […]